An expression evaluator operation could not be completed because there was an invalid attribute. An expression evaluator operation could not be completed because the cluster state of the computer could not be determined. An operation could not be completed because the scan package requires a greater version of the Windows Update Agent.
The reply from the server indicates that the server was changed or the cookie was invalid; refresh the state of the internal cache and retry. Same as HTTP status - the request was not completed due to a conflict with the current state of the resource.
Same as HTTP status - server does not support the functionality required to fulfill the request. Same as HTTP status - the server while acting as a gateway or a proxy received an invalid response from the upstream server it accessed in attempting to fulfill the request.
Windows Update Agent failed to download a redirector cabinet file with a new redirectorId value from the server during the recovery. A download manager operation could not be completed because the requested file does not have a URL. A download manager operation could not be completed because the file metadata requested an unrecognized hash algorithm.
An operation could not be completed because a download request is required from the download handler. A download manager operation could not be completed because the network connection was unavailable. A request for a remote update handler could not be completed because no remote process is available.
A request for an update handler could not be completed because the handler could not be recognized. A request for the handler to install uninstall an update could not be completed because the update does not support install uninstall.
A request to the handler to install an update could not be completed because the update requires user input. The update handler should download self-contained content rather than delta-compressed content for the update. The update handler failed to send notification of the status of the install uninstall operation.
The data store is missing required information or has a NULL in a table column that requires a non-null value. Does it always fail on the second device? This should get you started. If you need drivers, come back and tell us the device manufacturer and model. Good luck! Maggie , here is your answer. It is also possible that these drivers are not fully compatable with W You may want to try and boot into safe mode and then reinstall the the sound driver.
As for the comm driver, as long as it is not networking associated then safe mode should work also. This is not so much an answer as a hint. Error Code "The system tried to delete the substitution of a drive that is not substituted.
If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.
Please note: Do not post advertisements, offensive material, profanity, or personal attacks. Double-click the icon that represents the device in the Device Manager window. Code 14 "This device cannotwork properly until you restart your computer. Code 16 ". Recommended Resolution The following steps might only work if the device is a Plug and Play device. Double-click the device in the list, and choose the Resources tab. Code 18 "Reinstall the drivers for this device. Code 18 ".
Recommended Resolution Reinstall the device driver using the Hardware Update wizard From Start, search for device manager and select Device Manager from the results. Right-click the device in the list. Reinstall the device driver manually From Start, search for device manager and select Device Manager from the results. Select Uninstall from the menu that appears. After the device is uninstalled, choose Action on the menu bar.
Select Scan for hardware changes to reinstall the driver. Code 19 "Windows cannot start this hardware device… Code 19 ". Full Error Message Windows cannot start this hardware device because its configuration information in the registry is incomplete or damaged.
Code 19 Cause This error can result if more than one service is defined for a device, there is a failure opening the service key, or the driver name cannot be obtained from the service key. Recommended Resolution Uninstall and reinstall the driver From Start, search for device manager and select Device Manager from the results.
Revert to the most recent successful registry configuration To roll a system back to the most recent successful configuration of the registry, you can restart the computer in Safe Mode and select the Last Known Good Configuration option, or if you've created a system restore point, you can try restoring to it. Full Error Message Windows is removing this device. Code 21 Cause This error means that Windows is in the process of removing the device.
Recommended Resolutions You can either wait for Windows to finish removing the device or restart the computer. Wait several seconds, and then press the F5 key to update the Device Manager view. Cause The device was disabled by the user in Device Manager. Code 24 "This device is notpresent, is not working properly… Code 24 ".
Full Error Message This device is not present, is not working properly, or does not have all its drivers installed. Code 24 Cause The device is installed incorrectly. Recommended Resolution Remove the device, and this error should be resolved. Code 28 "The drivers for this device are not installed.
Code 28 ". Recommended Resolution Reinstall the device driver manually From Start, search for device manager and select Device Manager from the results. Full Error Message This device is disabled because the firmware of the device did not give it the required resources. Code 31 "This device is not working properly Code 31 ". Full Error Message This device is not working properly because Windows cannot load the drivers required for this device. Code 31 Recommended Resolution Reinstall the device driver using the Hardware Update wizard From Start, search for device manager and select Device Manager from the results.
Code 32 ". Full Error Message A driver service for this device has been disabled. Code 32 Cause The start type for this driver is set to disabled in the registry. Cause The translator that determines the kinds of resources that are required by the device has failed. Configure, repair, or replace hardware. Full Error Message Windows cannot determine the settings for this device. Code 34 Recommended Resolution The device requires manual configuration.
Full Error Message Your computer's system firmware does not include enough information to properly configure and use this device. Code 37 "Windows cannot initialize the device driver for this hardware.
Code 37 ". Cause The driver returned a failure when it executed the DriverEntry routine. Full Error Message Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.
Code 38 Cause The driver could not be loaded because a previous instance is still loaded. Recommended Resolution Restart your computer. Full Error Message Windows cannot load the device driver for this hardware. Code 39 Recommended Resolution Reinstall the device driver manually From Start, search for device manager and select Device Manager from the results.
Full Error Message Windows cannot access this hardware because its service key information in the registry is missing or recorded incorrectly. Code 40 Cause Information in the registry's service subkey for the driver is invalid. Full Error Message Windows successfully loaded the device driver for this hardware but cannot find the hardware device. Code 41 Cause This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device.
Full Error Message Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system. Code 42 Cause A duplicate device was detected. Code 43 "Windows has stopped this device because it has reported problems. Code 43 ". Cause One of the drivers controlling the device notified the operating system that the device failed in some manner.
Recommended Resolution If you have already tried the "Try these steps first" section, check the hardware documentation or contact the manufacturer for more information about diagnosing the problem. Full Error Message Currently, this hardware deviceis not connected to the computer. Code 45 Cause This error occurs if a device that was previously connected to the computer is no longer connected. Recommended Resolution No resolution is necessary.
Full Error Message Windows cannot gain access to this hardware device because the operating system is in the processof shutting down. Code 46 Cause The device is not available because the system is shutting down. Full Error Message Windows cannot use this hardware device because it has been prepared for safe removal, but it has not been removed from the computer.
Code 47 Cause This error code occurs only if you used the Safe Removal application to prepare the device for removal, or pressed a physical eject button. Recommended Resolution Unplug the device from the computer, and then plug it back in. Full Error Message The software for this device has been blocked from starting because it is known to have problems with Windows. Code 48 Recommended Resolution Contact the manufacturer of your hardware device to obtain the latest version or the updated driver.
Full Error Message Windows cannot start new hardware devices because the system hive is too large exceeds the Registry Size Limit. Code 49 Cause The system hive has exceeded its maximum size and new devices cannot work until the size is reduced. Recommended Resolution Uninstall any hardware devices that you are no longer using. Set Device Manager to show devices that are no longer connected to the computer.
From Start, click Run. In the Open box, type cmd. The Command Prompt window opens. Check the device Properties dialog box in Device Manager to see whether the error is resolved.
Code 50 "Windows cannot apply all of the properties for this device Code 50 ". Full Error Message Windows cannot apply all of the properties for this device.
Code50 Recommended Resolution Reinstall the device driver manually From Start, search for device manager and select Device Manager from the results. Full Error Message This device is currently waiting on another device or set of devices to start.
Recommended Resolution There is currently no resolution to this problem. Full Error Message Windows cannot verify the digital signature for the drivers required for this device.
Code 52 Cause The driver may be unsigned or corrupted. Recommended Resolution Download the latest driver from the hardware manufacturer's website, or contact the manufacturer for help. Full Error Message This device has been reserved for use by the Windows kernel debugger for the duration of this boot session.
Code 53 Recommended Resolution Disable Windows kernel debugging to allow the device to start normally. Need more help? Expand your skills. Get new features first. Was this information helpful? Yes No. Thank you!
0コメント